P8 Outdoor Rgb Panel
P8 Outdoor Rgb Panel
Product explanation
2.1. Outdoor full color SMD Q8 5 scan module consists of red LED wafer、 green LED wafer and blue LED wafer packaged as a pixel and form a matrix,and then fixed to the plastic packages; 2.2 This module contains the driver chip and chip input buffer,connected to a LED display control system to display video、image and text message; 2.3 Through OE signal to drive red LED、green LED and blue LED driver IC,can form 43980 hundred million color conversion; 2.4 This module can be spliced horizontally or vertically,thus spliced into the kind; 2.5 Module features: • Use highlight LED and high quality plastic parts • High contrast display can achieve a good effect • Light weight easy to install、disassembly • Use constant current drive LED,light uniformity,low power consumption • Pixel pitch 8mm,total 40*20 pixel,each pixel consists of 1R1G1BLED parameters:
| package | color | brands | test current | brightness | wavelength | quantity | 
| 3535 | R | 20mA | ≥660mcd | 615-630nm | 1 | |
| G | 20mA | ≥1450mcd | 515-530nm | |||
| B | 20mA | ≥300mcd | 460-475nm | 
Screen technical parameters:
| Module technical parameters | Pixel pitch | 8mm | Pixel density | 15625Dots/㎡ | |
| Pixel constitute | 1R1G1B | Module resolution | 40*20=800Dots | ||
| size(length*width*height ) | 320.0*160.0*19.1mm | weight | 0.42kg±0.05kg | ||
| Structural features | IC and PCB in one | Kit materials | Polycarbonate PC | ||
| Input voltage | 4.5V | Maximum current | 7.3A±0.1A | ||
| consumption | ≤32.85W | Drive mode | 1/5 constant current | ||
| Case technical parameters | Standard case(length*width*height) | 640mm*960mm*90mm | |||
| Case resolution | 80*120=9600 Dots | ||||
| Housing area | 0.6144 ㎡ | ||||
| Case weight | 17.5kg±0.05 kg | ||||
| Maximum consumption | 394.2W | ||||
| Average consumption | 197.1W | ||||
| Power distribution consumption | 505.8W | ||||
| Technical parameters | brightness | 5000~5500cd/㎡ | Brightness | >0.95 | |
| horizontal viewing | 140±10° | verticalviewing | 130±10° | ||
| Best viewing distance | ≥8m | Deadlightsrate | Less than 3/10000 | ||
| Maximumconsumption | ≤641.7W/㎡ | Environment | outdoor | ||
| Power distribution consumption | 968.4W | ||||
| System control parameter | Gradation | red、green、blue each 12-16bits | color | 43980 hundred million | |||
| Frame rate | ≥60 | Fresh rate | ≥480Hz | ||||
| Control mode | Computer control video synchronization | Brightness adjust | 256 level manually/automatic | ||||
| Input signal | DVI/VGA, video RGBHV、 composite video signals 、S-VIDEO YpbPr(HDTV) | ||||||
| System operating characteristics | Lifetime | ≥100,000 | NO fault time | ≥10 thousand hours | |||
| Decay rate(3years) | ≤15% | Constant out of control points | 0 | ||||
| Discrete control point | <0.0001,when leave the factory is 0 | Dead lamp rate | <0.0001 | ||||
| Temperature | -20 to 50℃ | Humidity | 10% to 90%RH | ||||
| Protective performance | Over temperature/overloaded/image compensation/correction/over current/over Voltage | ||||||
| Warranty | 1 year | ||||||
| Screen horizontal flatness | <1mm/㎡ | ||||||
| Screen vertical flatness | <1mm/㎡ | ||||||
Signal Pin
| Pin | Signal | Function | Pin | Signal | Function | 
| 1 | R1 | Red data signal | 2 | G1 | Green data signal | 
| 3 | B1 | Blue data signal | 4 | GND | GND | 
| 5 | R2 | Red data signal | 6 | G2 | Green data signal | 
| 7 | B2 | Blue data signal | 8 | DND | GND | 
| 9 | A | Line signal | 10 | B | Line signal | 
| 11 | C | Line signal | 12 | GND | Line signal | 
| 13 | S | Clock signal | 14 | L | Latch signal | 
| 15 | OE | Enable signal | 16 | CS | Blanking signal | 
Son Yazılar
Led Ajans0 Comments
         Kayan Yazı
Led Ajans0 Comments
         P10 Grafik Ekran Kullanımı
Led Ajans0 Comments
         P10 Panel
Led Ajans0 Comments
         P10 Panel
Led Ajans0 Comments