P10 Outdoor Rgb Panel
Product explanation
2.1. Outdoor full color SMD Q10 C2V5Hscan module consists of red LED wafer、green LED wafer and blue LED wafer packaged as a pixel and form a matrix,and then fixed to the plastic packages;
2.2 This module contains the driver chip and chip input buffer,connected to a LEDdisplay control system to display video、image and text message;
2.3 Through OE signal to drive red LED、green LED and blue LED driver IC,can form 43980 hundred million color conversion;
2.4 This module can be spliced horizontally or vertically,thus spliced into the kind;
2.5 Module features:
- Use highlight LED and high quality plastic parts
- High contrast display can achieve a good effect
- Light weight easy to install、disassembly
- Use constant current drive LED,light uniformity,low power consumption
- Pixel pitch 8mm,total 32*16 pixel,each pixel consists of 1R1G1B
LED parameters:
package | color | brands | test current | brightness | wavelength | quantity |
3535 |
R | 20mA | ≥660mcd | 615-630nm |
1 |
|
G | 20mA | ≥1450mcd | 515-530nm | |||
B | 20mA | ≥300mcd | 460-475nm |
Screen technical parameters:
Module technical parameters |
Pixel pitch | 10mm | Pixel density | 10000Dots/㎡ | |
Pixel constitute |
1R1G1B |
Module
resolution |
32*16=512Dots |
||
size(length*width*height
) |
320.0*160.0*19.1mm |
weight |
0.55kg±0.05kg |
||
Structural features | IC and PCB in one | Kit materials | Polycarbonate PC | ||
Input voltage |
4.5V |
Maximum
current |
9.45A±0.1A |
||
consumption | ≤42.53W | Drive mode | 1/2 constant current | ||
Case technical parameters |
Standard case(length*width*height) |
960mm*960mm*90mm |
|||
Case resolution | 96*96=9216 Dots | ||||
Housing area | 0.9216 ㎡ | ||||
Case weight | 29.8kg±0.05 kg | ||||
Maximum consumption | 765.5W | ||||
Average consumption | 383.4W | ||||
Power distribution consumption | 981.9W | ||||
Technical parameters |
brightness | 5000-5500cd/㎡ | Brightness | >0.95 | |
horizontal viewing | 140±10° | verticalviewing | 130±10° | ||
Best viewing distance | ≥10m | Deadlightsrate | Less than 3/10000 | ||
Maximumconsumption | ≤830.7W/㎡ | Environment | outdoor | ||
Power distribution consumption | 1253.7W |
System
control parameter |
12-16bits | |||||
Frame rate | ≥60 | Fresh rate | ≥1920Hz | |||
Control mode |
Computer control video
synchronization |
Brightness
adjust |
256 level
manually/automatic |
|||
Input signal |
DVI/VGA, video
RGBHV、 composite video signals 、S-VIDEO YpbPr(HDTV) |
|||||
System operating characteristics |
Lifetime | 100,000 | NO fault time | 10,000 | ||
Decay rate(3years) |
≤15% |
Constant out
of control points |
0 |
|||
Discrete control
point |
<0.0001,when leave
the factory is 0 |
Dead lamp
rate |
<0.0001 |
|||
Temperature | -20 to 50℃ | Humidity | 10% to 90%RH | |||
Protective
performance |
Over temperature/overloaded/image
compensation/correction/over current/over Voltage |
|||||
Warranty | 1 year | |||||
Screen horizontal flatness | <1mm/㎡ | |||||
Screen vertical flatness | <1mm/㎡ |
Signal Pin
Pin |
Signal |
Function |
Pin |
Signal |
Function |
1 |
R1 |
Red data signal |
2 |
G1 |
Green data
signal |
3 |
B1 |
Blue data signal |
4 |
GND |
GND |
5 |
R2 |
Red data signal |
6 |
G2 |
Green data
signal |
7 |
B2 |
Blue data signal |
8 |
DND |
GND |
9 |
A |
Line signal |
10 |
B |
Line signal |
11 |
C |
Line signal |
12 |
GND |
Line signal |
13 |
S |
Clock signal |
14 |
L |
Latch signal |
15 |
OE |
Enable signal |
16 |
CS |
Blanking signal |
Bir cevap yazın