Teklif Al

P6 Outdoor Rgb Panel

P6 Outdoor Rgb Panel

Product explanation

2.1.   Outdoor full color SMD Q6 8 scan module consists of red LED wafer、 green LED wafer and blue LED wafer packaged as a pixel and form a matrix,and then fixed to the plastic packages; 2.2   This module contains the driver chip and chip input buffer,connected to a LED display control system to display video、image and text message; 2.3   Through OE signal to drive red LED、green LED and blue LED driver IC,can form 43980 hundred million color conversion; 2.4  This module can be spliced horizontally or vertically,thus spliced into the kind; 2.5   Module features:
  • Use highlight LED and high quality plastic parts
  • High contrast display can achieve a good effect
  • Light weight easy to install、disassembly
  • Use constant current drive LED,light uniformity,low power consumption
  • Pixel pitch 6mm,total 32*32 pixel,each pixel consists of 1R1G1B

LED parameters:

package color brands test current brightness wavelength quantity
  3535 R 20mA ≥660mcd 615-630nm   1
G 20mA ≥1640mcd 515-530nm
B 20mA ≥360mcd 460-475nm
 

Screen technical parameters:

        Module technical parameters Pixel pitch 6mm Pixel density 27777Dots/㎡
  Pixel constitute   1R1G1B Module  resolution   32*32=1024Dots
size(length*width*height  )   192*192*18.3mm   weight   0.335kg±0.05kg
Structural features IC and PCB in one Kit materials Polycarbonate PC
Input voltage 4.5V Maximum current 6.94A±0.1A
consumption ≤31.2W Drive mode 1/8 constant current
      Case technical parameters   Standard case(length*width*height)   768mm*768mm*90mm
Case resolution 128*128=16384 Dots
Housing area 0.590 ㎡
Case weight 18.5kg±0.05 kg
Maximum consumption 500.4W
Average consumption 250.2W
Power distribution consumption 641.7W
    Technical parameters brightness 5000~5500cd/㎡ Brightness >0.95
horizontal viewing 140±10° verticalviewing 130±10°
Best viewing distance ≥6m Deadlightsrate Less than 3/10000
Maximumconsumption ≤847.8W/㎡ Environment outdoor
Power distribution consumption 1278.9W
        System control parameter   Gradation red、green、blue each  12-16bits   color   43980 hundred million
Frame   rate ≥60 Fresh rate ≥1920Hz
  Control mode Computer control video  synchronization Brightness  adjust 256                          level  manually/automatic
  Input signal DVI/VGA, video  RGBHV、 composite video signals  、S-VIDEO YpbPr(HDTV)
            System operating characteristics Lifetime ≥100,000 NO fault time ≥10 thousand hours
Decay  rate(3years)   ≤15% Constant out of  control points   0
Discrete control  point   <0.0001,出厂时为 0   Dead lamp rate   <0.0001
Temperature -20 至 50℃ Humidity 10%至 90%RH
Protective  performance Over      temperature/overloaded/image       compensation/correction/over  current/over Voltage
Warranty 1 year
Screen horizontal flatness <1mm/㎡
Screen vertical flatness <1mm/㎡

Signal Pin

  Pin   Signal   Function   Pin   Signal   Function
  1   R1   Red data signal   2   G1   Green          data   signal
  3   B1   Blue data signal   4   GND   GND
  5   R2   Red data signal   6   G2   Green          data   signal
  7   B2   Blue data signal   8   DND   GND
  9   A   Line signal   10   B   Line signal
  11   C   Line signal   12   GND   Line signal
  13   S   Clock signal   14   L   Latch signal
  15   OE   Enable signal   16   CS   Blanking signal
 

Add a Comment

Your email address will not be published.

Son Yazılar

Kayan Yazı

P10 Grafik Ekran Kullanımı

P10 Panel

P10 Panel

P10 Panel